H3C路由器设置单臂路由,使VLAN互通并设置DHCP

H3C路由器设置单臂路由,使VLAN互通并设置DHCP

路由器设置单臂路由，实现VLAN间互通，并在单臂路由的端口设置每个VLAN的DHCP服务

网络拓扑图如下：

路由器单臂路由端口设置:

------------------------------------------------------------

GE 0/0.2:

interface GE 0/0.2

vlan-type dot1q vid 2

ip address 10.0.0.1 12

dhcp select server

dhcp server select apply ip-pool vlan2

------------------------------------------------------------

interface GE 0/0.3

vlan-type dot1q vid 3

ip address 10.16.0.1 12

dhcp select server

dhcp server select apply ip-pool vlan3

路由器DHCP设置:

------------------------------------------------------------

vlan2地址池:

dhcp server ip-pool vlan2

network 10.0.0.0 mask 255.240.0.0

gateway-list 10.0.0.1

forbidden-ip 10.0.0.1

------------------------------------------------------------

vlan3地址池:

dhcp server ip-pool vlan3

network 10.16.0.0 mask 255.240.0.0

gateway-list 10.16.0.1

forbidden-ip 10.16.0.1

------------------------------------------------------------

系统视图中使用dhcp enable开启路由器DHCP服务

核心交换机设置:

------------------------------------------------------------

GE 1/0/1:

port link-type trunk

port trunk permit vlan 2 3

------------------------------------------------------------

GE 1/0/2:

port link-type hybrid

port hybrid pvid vlan 2

port hybrid vlan 2 untagged

------------------------------------------------------------

port link-type hybrid

port hybrid pvid vlan 3

port hybrid vlan 3 untagged

测试PC机地址获取，两台PC均成功获取

测试PC间互通，两台PC均互通成功